Manual Operation - Erreka CALYPSO Guía Rápida De Instalación Y Programación

Unlocking (manual operation)
• Insert the key and turn it 180.

The brackets should
1 1
be placed at the
same height, thus
ensuring that
operator
horizontal.
1 Mount the wall bracket (1). Use an auxiliary plate (2) if
necessary (not included).
3 Position the gate bracket (5) and weld it on. Use an
auxiliary plate if necessary (not included).
5 Carry out several opening and closing movements manually in order to check proper operation.
14
the
is

Manual operation

Locking (motorised operation)
• Turn the key 180.
• Place the protection device on the lock.
D195A
Assembly
2 Mount the operator on the wall bracket, using the pin
(3) and clips (4).
P195A
4 Mount the operator on the gate bracket, using the pin
and clips (6).
P195C
6
D195B
M195I
P195B
P195D