Electrical Connections - Erreka CALYPSO Guía Rápida De Instalación Y Programación


For CA43 and CA53 (230V / 50Hz) operators we recommend using the VIVO-M101 control panel (for
single operator facilities) and the VIVO-M201 control panel (for dual operator facilities).

For CA43M and CA53M (125V / 60Hz) operators we recommend using the VIVO-M101M control
panel (for single operator facilities) and the VIVO-M201M control panel (for dual operator facilities).
P1 P2 P3 P4 P5 P6
ST1 FT1 ST2 FT2

When pressing PUL1, DL5 lights up and
the G2/G5 and
connectors are activated.

When pressing PUL2, DL4 lights up and
the G1/G4 and
connectors are activated.

Electrical connections

FCA2 COM FCC2 SCA
P15 P14 P16 P7 P8 P11 P12 P22 P23 G7 G8
Courtesy
24Vac
FCA1 FCC1 STOP LOCK
Light
G3/G6 cable
G3/G6 cable
G4 G5 G6 G1 G2 G3
G9 G10
Lamp.
MOTOR2 (G2-G1-COM) MOTOR1 (G2-G1-COM)
G4 G5 G6 G1 G2 G3
A1, A2 operators
C1, C2 capacitors:
CA43 and CA53 (230V): 8μF
CA43M and CA53M (125V): 25μF
DL4 gate opening
DL5: gate closing
PUL1 close mini-pushbutton
PUL2 open mini-pushbutton
T Earth connection
Operator connections A1 / A2:
G1 / G4 open,
CA43 and CA53 (230V): brown wire
CA43M and CA53M (125V): red wire
G2 / G5 close, black wire
G3 / G6 common (COM),
CA43 and CA53 (230V): grey wire
CA43M and CA53M (125V): white wire
T earth (GND),
CA43 and CA53 (230V): yellow - green wire
CA43M and CA53M (125V): green wire
N L
POWER
VIVO-M201: 230Vac/50Hz
VIVO-M201M: 125Vac/60Hz
P195V
15