screw
2
4
Tighten with wrench
Drawer door handle assembly
2
08_
setting up
1
3
Fix the handles to the doors by
sliding them down firmly.
5
Check the direction of Handle
assembly.
1
Fix the handles to the doors by
sliding them left side firmly.
3
Fix the handles to the doors by sliding them left
side firmly.
4
5
Tilt up the Handle bar and tighten with wrench
firmly.
Disassemble the refrigerator doors
Be careful not to drop and scratch the
doors while removing them.
WARNING
With the door opened
1.
Remove 3 screws holding down the TOP
TABLE ( 1 ) and turn it with wires connected.
Disconnect two connector ( 2 ) on the left side
door. To remove the water coupler from the
hinge, twist and pull it from the hinge.
2
1