Product Dimensions And Cutout Requirements; Important Preparation Suggestions - Verona VECTGV304SS Manual De Instalación

Important Preparation Suggestions

1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Important Preparation Suggestions
Recommend 1/4"or 3/8" diameter drill In each
corner.
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4"or 3/8" diameter drill In each
corner.
4"
(10.2 cm)
Figure 1. Product dimensions
Figure 1. Product dimensions
Figure 2. Coutout dimensions
Figure 2. Coutout dimensions

Product Dimensions and Cutout Requirements

Product Dimensions and Cutout Requirements
30-3/4"
(78.2 cm)
(53.4 cm)
2-13/16"
(7.1 cm)
30"
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
21"
4"
(10.2 cm)
7-3/16"
(18.4 cm)
CUT OUT
WIDTH
30" MIN.28-1/2"
(72.4 cm)
MAX.29"
(73.6 cm)
36" CUT OUT MIN 34-1/2"
WIDTH (87.6 cm)
MAX 35"
30" MIN.28-1/2"
(88.9 cm)
(72.4 cm)
MAX.29"
(73.6 cm)
36" MIN 34-1/2"
(87.6 cm)
MAX 35"
(88.9 cm)
Installation Manual
36-3/4"
(93.3 cm)
36"
A B
MIN 19" 2-1/2"
(48.3 cm) (6.35 cm)
MAX 19-5/8"
(49.8m cm)
MIN 19" 2-1/2"
A B
(48.3 cm) (6.35 cm)
MAX 19-5/8"
MIN 19" 2-1/2"
(49.8m cm)
(48.3 cm) (6.35 cm)
MAX 19-5/8"
(49.8m cm)
MIN 19" 2-1/2"
(48.3 cm) (6.35 cm)
MAX 19-5/8"
(49.8m cm)
ENGLISH
21"
(53.4 cm)
2-13/16"
(7.1 cm)
7-3/16"
(18.3 cm)
C D
MIN 1-1/2"
(3.8 cm)
MIN 1-1/2"
C D
(3.8 cm)
MIN 1-1/2"
(3.8 cm)
MIN 1-1/2"
(3.8 cm)
5