Custom Setting - Changing The Ai-Net Settings - Alpine DVA-5200 Manual De Operación

Custom setting – Changing the Ai-NET settings
Custom setting –
Changing the Ai-NET settings
The Ai-NET settings are used to output the
sound of connected Ai-NET products.
Select "CUSTOM SETUP" under
"Changing the default settings
(SET UP)" on page 26.
Use the " 8 " or " 9 " key to select
"Ai-NET SETUP", then press
"ENTER".
or
Use the " 8 " or " 9 " key to select
"DVD" or "CD", then press
"ENTER".
or
DVD
Set to "DVD" when connected to the CVA-1005.
Operations can be performed using the CVA-
1005's main menu screen.
For details, refer to the operating instructions of
the CVA-1005.
"DVD" is selected upon shipment from the
factory.
CD
Set to "CD" when connected to an Ai-NET
product (head unit) other than the CVA-1005.
Operations can be performed from the head
unit.
For details, refer to "Operating from the head
unit" (page 52).
Notes:
• Press "RETURN" to return to the previous screen.
• Operations cannot be performed using the main
menu screen if the Ai-NET setting is set to "CD"
ENTER
when connected to the CVA-1005.
• If the Ai-NET setting is set to "DVD" when
connected to an Ai-NET compatible head unit
other than the CVA-1005, the only operation
possible from the head unit is the volume
adjustment operation.
• When the Ai-NET setting is set to "CD", the
operable functions and displays may differ
depending on the connected Ai-NET compatible
head unit.
Press "SET UP".
The settings are stored and the
set up mode is canceled.
ENTER
The message "PLEASE PUSH RESET
SW" is displayed in step 3. Press the
reset switch on the DVA-5200's front
panel using the tip of a pen, etc. The DVA-
5200's power turns off.
Turn off the vehicle's ignition, then turn
it on again.
Display the message
SET UP
SET UP
SET UP
35