Related Manuals; Tls-50 Description - Veeder-Root TLS-50 Manual Del Usario

Introduction
This manual contains setup and operation instructions for the Veeder-Root TLS-50 Tank Monitoring System. The
Authorized Service Contractor is cautioned to verify that the TLS-50 Console and probes are installed and wired
correctly following the procedures outlined in the TLS-50 Site Prep Manual, before beginning the setup
procedures contained herein.

Related Manuals

577013-608 TLS-50 Site Prep Manual

TLS-50 Description

The TLS-50 Tank Monitoring System monitors up to six in-tank probes for a wide variety of fluids. Probes are
available to measure inventory only or inventory plus product temperature and/or water height. System status is
available to the operator through a front panel display and remotely, via an optional RS-232 serial interface port
(Figure 1).
Monitor Up To 6 Probes
In Customer's Tanks
Console Power
115/230 V ac
From Customer's Power Source
Overfill Alarm Relay Output
with Alarm Package Option
To Customer's Overfill Alarm
1
4
ALL FUNCTIONS NORMAL
T1 VOL:
consoles\tls50\50site.eps
Figure 1. Console Inputs and Outputs
2
5
Console
9889 GAL
Serial Interface Port with Serial Package Option
Customer's Printer, Modem, or Computer
1
3
6
(Limited to one external device)