Warning Symbols; Using The Tester; Lntroduction; C-Logic 3400 Features - C-LOGIC 3400 Manual De Instrucciones

Warning Symbols

&.
. Risk of danger. lmportant information.
W arning See Users Manual
Statement identifies conditions and actions
&.
that fail to follow the instructions could
.
C
aution result false reading, damage the Tester or
the equipment under test.

Using the Tester

&
WARNING
TO AVOID ELECTRICAL SHOCK AND INJURY,
COVER THE TESTER WITH PROTECTIVE COVER
WHEN NOT IN USE.
.&.caution
1. Operate the Tester between 0-50
2. Avoid shaking, dropping or taking any kind of
impacts when using or transporting the Tester.
3. To avoid possible electric shock or personal injury,
repairs or servicing not covered in this manual
should be performed only by qualified personnel.
4. Check the terminals every time befare operate the
Tester. Do not operate the Tester if the terminals
are damaged or one or more functions are not
working properly.
5. Avoid exploring the Tester to direct sunlight to
ensure and extend the life of the Tester.
6. _ Do not place the Tester _ in strong magnetic field,
1t may cause false readings.
º º
C (32-122 F).
03
7. Use only the batteries indicated in the Technical Spec.
8. Avoid exploring !he battery to humidity. Replace the
batteries as soon as the low battery indicator appears.
9. Sensitivity of the Tester toward temperature and
humidity will be lower over time. Please calibrate the
Tester periodically for best performance
1 O. Please keep the original packing for future
shipping purpose (ex. Calibration)

1. lntroduction

C-LOGIC 3400 is a hand held network cable !ester,
ideal for Coaxial Cable (BNC), UTP and STP Cable
installation, measurement, maintenance or
inspection. lt also offers a fas! and convenient way of
testing telephone line modes, greatly simplifies
telephone line installation and maintenance .

1.1 C-LOGIC 3400 Features

• Self implement T568A, T568B, 1 OBase-T and Token
Ring cables testing.
• Coaxial UTP y STP cable test.
• Network configuration and integrity test.
• Open/shorts circuit, miss wiring, reversals, and split
pairs testing.
• Network Continuity testing.
• Cable open/short point tracing.
• Receive signa Is in the network or telephone cable.
• Transmitting signal to target network and tracing
cable direction.
• Detect telephone line modes: ideal, vibrate, or in
u sed ( off-hook)
04