GE JGB760DEF2BB Manual Del Propietário página 23

Cleaning The Oven (Cont.)
Oven interior (Cont.)
Self Clean Mode
Read Self-Cleaning Oven Safety Instructions at the
beginning of this manual before using Self Clean Mode.
Self clean uses very high temperatures to clean the
oven interior. The oven door will lock when using this
feature. Before operating the self-clean cycle, pre-wash
inner door and inside window before self-cleaning. Wipe
inner black door before self clean. Remove all items
from the oven other than enameled (dark color) racks.
Shiny or silver racks, the meat probe, and any cookware
or other items should all be removed from the oven
before initiating a self-clean cycle. The surface burners
must be turned off prior to the self-clean start time.
Cooktop burners will not start during self clean cycle.
Close the door. Press the Clean pad once and a default
self-clean time is displayed. Press the Start pad or use
the number pads to enter any clean time between 3 and
5 hours and press start. For heavily soiled ovens 5 hours
is recommended. The oven will turn off automatically
when the self-clean cycle is complete. The door will stay
locked until the oven has cooled down. After the oven
has cooled down wipe any ash out of the oven.
IMPORTANT: The health of some birds is extremely
sensitive to the fumes given off during the self-cleaning
cycle of any range. Move birds to another well-ventilated
room.
Oven Racks
All oven racks may be cleaned by hand with an abrasive
cleaner or steel wool. Black porcelain-coated oven racks
may remain in the oven during the self-cleaning cycle
without being damaged. If nickel-plated oven racks
remain in the oven during the self-cleaning cycle, they
will lose their luster and become hard to slide. It will be
necessary to grease all oven rack side edges with a light
coating of vegetable oil after cleaning them by hand or in
the oven. This will help maintain the ease of sliding the
racks in and out of the oven.
Probe
The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the temperature
probe before cleaning. Scour stubborn spots with a
soap-filled scouring pad, rinse and dry.
To order additional temperature probes read the
Assistance and Accessories sections at the beginning of
this manual.
[] Do not immerse the temperature probe in water.
[] Do not store the temperature probe in the oven.
[] Do not leave the temperature probe inside the oven
during a self or steam clean cycle.
Cb
:1:=,
Z
qb
r-Pi
Z
Z
©
I I
Cb
I
(T)
I i
LC)
:ST
©
Q
©