Preventive Maintenance; Electrical Connections - IMS Welding POWERDUCTION 37LG Manual De Instrucciones

Translation of the original instructions

Preventive maintenance

Meticulous inspections should be carried out at regular intervals to quickly detect and eliminate faults, so they will not
cause damage to the device.
Prior to each use of the POWERDUCTION, check the unit's security systems and any anomalies that may
hinder the proper operation of the device. Perform daily checks to identify signs of wear.
The operational safety of the product can only be guaranteed if the repairs are carried out using original
spare parts, and if the maintenance instructions are followed.
After each use and once the product is switched off, it should be cleaned immediately to remove any dust or
dirt that may impair cooling efficiency, affect the proper functioning of the product and reduce its lifespan.
Before each use, check the good operation of the main systems, security systems, and all the electrical
cables connection.
Perform periodic visual inspections to verify that there are no cooling liquid leaks, and check that the vents
are not obstructed.

ELECTRICAL CONNECTIONS

The product is designed to operate on a single phase power supply from 185 V to 265 V,
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
• Inductors and removable ferrites that are consumables.
• Use of unspecified coolant.
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
POWERDUCTION 37LG / 39LG / 50LG EN
33