Buttons/Input Jack Description; Auto Power Off Function; Lcd Display - C-LOGIC 5900 Manual De Instrucciones

2.2 Buttons/Input jack description

FUNC button:
• Press "FUNC" to switch between AC/DC or between
function in a rotary switch position.
HOLD button:
• Press "HOLD" to keep the current reading on screen.
"H" symbol will appear on the display.
• Press "HOLD" again to release th hold.
button:
• Press " " to turn on the backlight. the backlight will
turn off automatically after 15 seconds
RANGE button:
• Press "RANGE"to switch to manual range.Each press
of the button will switch to the next highest range, until
reaching the highest range where it will switch to the
lowest range.
• Hold "RANGE" to return to auto range.
button:
• With the rotary switch in any position other than OFF,
press to enable the Wireless communication function
of the meter. Open the app (iOS or Android) on the
mobile device to be used and search for the multimeter
and establish a connection. Once connected, the app
will mirror the display of the meter and show any
measurement being performed. Press
disconnect the meter from the mobile device.
Hz/DUTY button:
• Press "Hz/DUTY" to start the frequency counter.
• Press "Hz/DUTY" again to enter duty-cycle mode.
• Press "Hz/DUTY" again to exit the frequency counter
mode.
REL button:
• Press "REL" to enter and exit the relative measurement
mode.
again to
07

2.3 Auto power off function

• After 15 minutes of non-use the meter will automatica-
lly turn itself off.
• To turn the meter back on, press "FUNC".
• To deactivate the auto power off function, hold down
"FUNC" when turning on the meter.
displayed.

2.4 LCD Display

6 7
5
4
3
2
1
No. Description
1 DC (direct current)
2 AC (alternating current)
Polarity indicator
3
4 Wireless indicator
Auto power off indicator
5
Auto-range
6
Transistor test mode
7
Relative measurement
8
will no longer be
8 9 10 11 12
13
14
15
16
No. Description
9 Data hold
10 True root mean square
Diode measurement
11
12 Continuity buzzer
Low battery indicator
13
Unsafe voltage warning
14
Measurement units
15
Main display
16
08