Resistance; Diode Test; Continuity; Dc Current - C-LOGIC 5900 Manual De Instrucciones

- Input impedance: 10M
- Max. input voltage: 600V DC or AC True-RMS.
- Frequency reponse: 40~400Hz
- Response: True-RMS

3.2.3 Resistance

400Ω
4KΩ
40KΩ
400KΩ
4MΩ
40MΩ
- Overload protection: 600 DC or AC True-RMS

3.2.4 Diode test

2.7V 1mV
- Overload protection: 600V DC or AC True-RMS

3.2.5 Continuity

Open circuit
voltage~1 V
- Overload protection: 600V DC or AC True-RMS
±( 0.8% of reading + 3 digits )
Displays shows forward
voltage drop
11

3.2.6 DC current

400μA
4000μA
±( 1.0% of reading + 10 digits )
40mA 0.01mA
400mA
0.1mA
10A
- Overload protection:
mA jack: FF 400mA H 1000V
10A jack: FF 10A H 600V
- Max input current:
mA jack: 400mA
10A jack: 10A

3.2.7 AC current

400μA
4000μA
±( 1.5% of reading + 5 digits )
40mA 0.01mA
400mA
0.1mA
10A ±( 3.0% of reading + 5 digits )
- Overload protection:
mA jack: FF 400mA H 1000V
10A jack: FF 10A H 600V
- Frequency response: 40~400Hz, true RMS response
- Max input current: mA jack: 400mA DC or AC rms
10A jack: 10A DC or AC rms
- When measuring current exceeding 2A, do not measure
for longer than 2 minutes continuously. Wait 10 minutes
to continue measurement.
12