Assembly
Ensure the visor's correct assembly.
INTERNAL PADDING
The internal padding can be easily removed for washing or replacing.
The internal comfort padding is fixed to the helmet by Velcro.
Removal
Insertion
Make sure that it is properly positioned.
Then remove the visor from the helmet.
USE AND MAINTENANCE
Place the visor by carefully matching the link points to the inserts positioned inside the
helmet profile (fig. 8) while making sure that the sides remain on the helmet's exterior.
Then press firmly on the three link buttons until they are fully connected to the visor.
Carefully lift the padding from the internal cap of the helmet and detach it from the Velcro
(fig. 9 A).
Lay the internal padding against the interior profile of the helmet. Exert a slight pressure
inside on the Velcro straps to ensure the correct fitting (fig. 9 B).
EN