Anatomy Of The Helmet; Outer Shell - Schubert SR1 Manual De Instrucciones

D. the helmet

3. ANATOMY OF THE HELMET

Visor
Inner lining
Breath defl ector
Air exit from head
Visor ventilation
2-way chin
ventilation
Wind defl ector

4. OUTER SHELL

The outer shell of the SR1 combines an aerodynamically optimal
shape.It consists of glassfi bre reinforced vinylester (GRP) with
polyethylene fi bre reinforced layers. This structure gives the
helmet the high level of strength and rigidity needed for your
protection*.
* The helmet is designed to provide the safety performance required by the United
States DOT 218 Standard in combination with the European ECE R 22.05 Standard
Warning:
The safety helmet is designed to absorb the effect of only one
impact. The helmet must be replaced after a fall, accident or
any other impact.
Note:
For cleaning instructions see section H.1. (care and
maintenance – outer shell) of this manual.
12
Head ventilation
Inner shell
Outer shell
Visor mechanism
(push-release system)
Retaining system
(anti-roll-off system)
Visor regulation/visor
locking/urban
Noise-reduction system
(N.R.S.)
Chin strap
(with double-D fastener)