Schubert SR1 Manual De Instrucciones página 40

G. for Your sAfetY
Warning:
Replace the helmet after no more than five years!
The useful life of the helmet depends on its use and care. We
recommend that this helmet has to be replaced after no more
than five years from its date of purchase.
Warning:
Never use the helmet with the lining removed
If the lining is not installed before use, the helmet may not
fit properly and could come off in an accident, resulting in
severe head injury or death. Excessive heat (e.g. exhaust
heat) can cause damage tographics, the inner shell of the
helmet and the interior lining!
Warning:
Never modify your helmet!
It is very dangerous to drill holes or to cut the shell and/or
the shock absorbing liner. Modification can seriously weaken
the helmet. Modifying the retention system weakens it,
increasing the likelihood of snapping during impact.
Removing parts such as the mouth guard or rubber face
molding can expose edges that may injure you in an
accident. Always use approved SCHUBERTH parts when
replacing shields, screws, or any other parts. A weakened
helmet will not provide head protection.
Warning:
Do not repaint the helmet!
Repainting of your helmet is not recommended. Certain types
of paint and thinner can damage the helmet and reduce its
ability to provide head protection in an accident.
Warning:
Avoid direct contact with aggressive substances!
The direct effect of motor fuels, thinners or solvents can
destroy the structure of the inner and outer shell. Make sure
the helmet does not come into contact with such substances,
even for cleaning purposes!
40