Putting The Helmet On And Taking It Off; Putting On The Helmet; Removing The Helmet - Schubert SR1 Manual De Instrucciones

e. PuttinG the helmet on
AnD tAKinG it off

1. PUTTING ON THE HELMET

Note:
See section D.10 for operation of the chin strap and fastening
systems.
1. Open the chin strap.
2. Take hold of the lower ends of the chin strap and pull these
apart firmly.
3. Place the helmet on your head.
4. Close the chin strap by threading the free end of the strap
through the double-D fastener, pull taut and fasten.
5. Ensure that the chin strap passes under your chin and is taut.
Note:
Check the correct position and length of the chin strap
regularly (see section F.2 'Checking the chin strap').

2. REMOVING THE HELMET

1. Open the chin strap by pulling on the red lug of the double-D
fastener and pulling the strap out from the metal eyes.
2. Grasp the ends of the strap and pull them firmly apart.
3. Remove the helmet from your head.
Tip:
To avoid scratching objects where the helmet may be placed,
we recommend you close the chin strap after you have taken
the helmet off.
35