Versions (Indicated On Part Label); Included In Shipment; Available Stroke Lengths; Accessories - Balluff BTL6-A301 Serie Manual Del Usuario

BTL6-A/G301-M_ _ _ _-A1-S115
Micropulse AT Transducer in round profile housing
7

Versions (indicated on part label)

Supply voltage
BTL6-A301-M0450-A1-S115
Nom. length (4 digits), M = metric in mm
Interface: A = 0...+10 V
G = -10...+10 V
01 = 2 outputs, each for 1 magnet
freely programmable:
Mode, 2 separate positions or 1 position and 1 differential
Measuring range
Output characteristics, rising or falling
7.1

Included in shipment

Transducer with condensed guide
7.2

Available stroke lengths

To provide for optimum fit in any
application, a wide range of stan-
dard stroke lengths are available:
8 Accessories (order separately)
8.1

Magnet

➥ Fig. 3-1
BTL6-A-3800-2
Weight approx. 30 g
➥ Fig. 3-2
BTL6-A-3801-2
Weight approx. 25 g
Housing plastic
Spacing, offset and installation
➥ Page 4
Operating temp. –40 °C to +85 °C
8.2

Mounting brackets

➥ Fig. 3-1
BTL6-A-MF03-K-50
➥ Fig. 8-1
BTL6-A-MF01-A-50
➥ Fig. 8-2
BTL6-A-MF01-A-43
7.5 35
15 Ø 5.5 +0.2 50 ±0.2
60 –0.3
Fig. 8-1: Mounting bracket
BTL6-A-MF01-A-50
3 = DC 24 V potential-free
Electr. connection: with connector S115
Profile style (round), Ø 30 mm
stroke lengths
150 ... 1500
Additional stroke lengths on request.
Stroke lengths < 200 mm are
suitable for single-magnet operation
only.
7.5
Ø 3.7 +0.2
15
Fig. 8-2: Mounting bracket
BTL6-A-MF01-A-43
8.3 Connection cables,
connectors
Shielded cable with connector on one
end
straight:
right-angle:
_ _ = Length L, 02, 05, 10, 15, 20, 25
05 means L = 5 m
Wiring assignments ➥ Table 4-1
Connector for shielded cable
straight:
Wiring assignments ➥ Table 4-1
increments
25 mm
straight
BKS-S115-00
32 –0.3
35
42.7 ±0.2
57 –0.3
Fig. 8-3: Connector (female)
➥ Fig. 8-4
BKS-S115-PU-_ _
BKS-S116-PU-_ _
➥ Fig. 8-3
BKS-S115-00
Ø 6 - Ø 8 Cable Entry
(PG 9 fitting)
M12×1
Ø 20
M12x1
26.5
Fig. 8-4: Connection cable BKS-S...
english
11