Establishing A Wireless Connection - AVM FRITZ!WLAN 1750E Instalación Y Operación

Integration into a Wireless Network
Insert the FRITZ!WLAN Repeater 1750E in an outlet in the
vicinity of your computer and your wireless access point (for
instance, a FRITZ!Box). Then establish a wireless connection
between the FRITZ!WLAN Repeater 1750E and your wireless
access point. You have 3 options for
establishing a connection. For more
instructions, continue reading on
page 9.
Then insert the FRITZ!WLAN Repeater
WLAN
1750E in an outlet located about
halfway between your wireless
access point and the wireless
devices to be added to the wireless
network.
Power
WLAN
LAN
8

Establishing a Wireless Connection

To expand your wireless LAN radio network, integrate your FRITZ!WLAN Repeater 1750E
into the network in a few simple steps. There are three ways to do this.
WPS Quick Connection (page 10)
WPS (Wi-Fi Protected Setup) is the simplest and fastest way to establish a secure
connection between wireless LAN devices. WPS is supported by all current
FRITZ!Box models with wireless LAN and by many wireless LAN access points from
other manufacturers. See the documentation for your wireless access point.
or
Online Wizard (page 11)
If you use Windows 8.1/8, Windows 7 or Windows Vista on your computer,
the convenient Online Wizard supports you in connecting and installing the
FRITZ!WLAN Repeater 1750E. Also use this method if your wireless access point
does not support WPS.
or
Manual setup (page 12)
Power
WLAN
LAN
No matter what operating system you use you can connect the
FRITZ!WLAN Repeater 1750E and your WLAN access point to each other manually.
9