Health O Meter Professional 596KL Manual Del Usuario página 10

SET-UP INSTRUCTIONS (CONT.)
Enabling/Disabling Sound
The display can be set to stay silent or beep while operating the scale. Follow this
procedure to enable or disable sound.
to power on the scale. Wait for "0.0" to appear on the display.
1. Press
ZERO
2. To enter the settings mode, press and hold
Release the button when "SETUP" appears on the display followed by "AOFF".
HOLD
once and "burr" will appear on the display.
3. Press
PRESS 3 SECS
FOR BMI MODE
4. To access the sound options, press
HOLD
display. Press
PRESS 3 SECS
FOR BMI MODE
When the desired option is displayed, press
will appear on the display.
5. Press TARE twice and "END" will appear on the display.
BSA
6. Press to return to weighing mode.
ZERO
Hold Function
The Hold function can be set to "on" or "off" on the display. Setting the Hold function to
"off" will allow the weight to be held on the display by pressing
setting for Hold is "off". Follow this procedure to change the Hold function setting.
to power on the scale. Wait for "0.0" to appear on the display.
1. Press
ZERO
2. To enter the settings mode, press and hold
Release the button when "SETUP" appears on the display followed by "AOFF".
HOLD
twice and "Hold5" will appear on the display.
3. Press
PRESS 3 SECS
FOR BMI MODE
4. To access the Hold function options, press
the display. Press
Note: If display shows "off" it means the HOLD is on. If display shows "on" it
means the HOLD is off.
5. When the desired option is displayed, press
will appear on the display.
TARE
6. Press three times and "END" will appear on the display.
BSA
7. Press to return to weighing mode.
ZERO
P/N UM596KL_596KL-C REV20190923_web
ZERO
to toggle between "off" and "on".
to toggle between "off" and "on".
HOLD
PRESS 3 SECS
FOR BMI MODE
TARE
for approximately 6 seconds.
BSA
then "off" or "on" will appear on the
to confirm the setting and "burr"
ZERO
TARE
for approximately 6 seconds.
BSA
then "off" or "on" will appear on
ZERO
to confirm the setting and "Hold5"
ZERO
10
HOLD
. The default
PRESS 3 SECS
FOR BMI MODE