Ups Setting - Infosec E3 PERFORMANCE 5000VA Manual De Usuario

BF
BR
EE

3.5 UPS setting

01: Output voltage setting

Interface
02: Programmable outlets enable/disable

Interface
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 12 18 AA 59 205 19
Battery Fault
Battery Replacement
EEPROM error
Parameters 2 & 3
Parameters 1
Setting
Parameter 2: Output voltage
For 120Vac models, you may choose the following output v
100: presents output voltage is 100Vac
110: presents output voltage is 110Vac
115: presents output voltage is 115Vac
120: presents output voltage is 120Vac (Default)
125: presents output voltage is 125Vac
For 230Vac models, you may choose the following output v
200: presents output voltage is 200Vac
208: presents output voltage is 208Vac
220: presents output voltage is 220Vac
230: presents output voltage is 230Vac (Default)
240: presents output voltage is 240Vac
Setting
Parameter 2: Enable or disable programmable outlets.
ENA: Programmable outlets enable
DIS: Programmable outlets disable (Default)
There are three parameters to set
up the UPS.
Parameter 1: It's for program
alternatives. Refer to below table.
Parameter 2 and parameter 3 are
the setting options or values for
each program
45