Robot Coupe MP 350 Turbo Manual De Instruccion página 9

- Unplug the power mixer.
- Turn the bell in the direction of the arrow
next figure) to separate the bell lug
tube lug .
F
- Remove the bell.
Removing the blades
Unplug the machine. Turn the bell in the direction of
the arrow (see next figure) to separate the bell
1
from the foot lug . Remove the bell.
E
F
To safely remove the sharp blades, hold with the
provided blade locking tool. Using the blade
disassembling tool, unscrew the male drive
coupling. As the drive coupling is unscrewed
disengage the blade for easy cleaning.
BLADE LOCKING
BLADES WITH WATERTIGHT SEALS
BELL
MALE DRIVING COUPLING
BLADE REMOVAL
8
• WHISK FUNCTION
(MP 350 Turbo Combi, MP 450 Turbo Combi,
(see
1
MP 450 Turbo FW)
from the
E
Attaching the whisk holder to the motor unit
C
B
- Unplug the power mixer.
- Align the flat side
the whisk holder with the catch
of the aluminum casing.
- Insert the conical part
the aluminum casing.
- Turn the whisk holder in the direction of the arrow
(see figure) until it is snugly locked into place.
Removing the casing
- Unplug the power mixer.
- Turn the whisk holder in the opposite direction
from that used to attach it.
- When it will go no further, remove the whisk
holder from the aluminum casing.
A
A C
of the conical part of
B
on the inside
C of the whisk holder into
Fitting the whisk into the whisk holder
C
D
- Grasp the holder in one hand.
- With the other hand, take the first whisk and insert
B
A
the shaft into the bore of the whisk holder
drive shaft. Make sure the drive lugs
properly aligned with the notches.
- As you push the whisk into the holder drive
shaft C , rotate it slightly in order to slide
the drive lugs into the notches
shaft , thereby locking the whisk into place
C
inside the shaft.
- To check that the whisk is properly fixed inside the
shaft C , gently pull the metal wires.
A
B
E
D are
D of the drive