Starrett S1005 Manual De Instruccion página 92

ENGLISH
the machine closely to MAKE the cleaning of work area, without the aid of
compressed air but with safety glasses;
14. Wipers, rags, cord, wire and other should NEVER be left around the
work area;
15. If the user is interrupted during the cutting operation, the proper pro-
cedure is COMPLETE operation and TURN OFF the machine, to avoid to lose
the attention;
16. Periodically CHECK the condition and integrity of the machine and
parts, as their accessories. CHECK if the accessories are properly adjusted;
17. DO NOT STORE materials or equipment on the machine;
18. If the material to be cut is covered with oil or grease can cause unex-
pectedly slipping the Band Saw Blade. CLEAR all excess oil or grease con-
tained in the surface material;
19. OBSERVE and RESPECT the technical characteristics of the machine;
20. CERTIFY that the Band Saw Blade does not enter into contact with the
material to be cut before it reaches the maximum speed. NEVER PUT the
hand on Band Saw Blade, between the area of Upper and Lower Guides in
any situation of the machine.PROTECT the Band Saw Blade when the ma-
chine is turned off.
92 S1005