8.7 Trunk Harness
Slide each of the four straps (b) through
each of the camlock brackets and secure
by pushing down on the camlocks. Then
connect the shoulder straps (c) into the two
camlocks at the top and two at the side.
B
C
8.8 Lateral Supports
Slide the cushion covers over the lateral
support with the open zip on the outside.
Feed the plastic buckle through the slot
in the cover, close the zip and secure the
Velcro flap.
8.9 Chest Harness
The chest harness can be attached by
clipping the male buckle (a) into the female
buckle (b) at either side of the lateral
supports.
A
B
8.10 Headrest cushion
Place the cushion onto the head support.
Snap the central fastener and two side
fasteners in place. Bring the lower flap under
the head support and attach the Velcro.