Leckey Mygo Max Manual Del Usuario página 19

10.1 Transferring your child
into and out of the seat
Before transferring the child into the seat
carry out the daily product inspection as
outlined in section 13 of this user manual.
Adjust the seat to a comfortable height
to facilitate transfer. Lock all the castors,
ensuring that they are facing outwards
to maximise product stability. Make sure
the safety buckle on the chest harness is
released and is out of the way to facilitate
transfer.
If the seat has flip-away thoracic laterals,
first move these out of the way using knob
a. Unclip the Leeway Pelvic Cradle in the
middle, undo the side velcro of the Leeway
Pelvic Cradle and allow the harness to open
out to facilitate transfer. Lastly if sandals are
fitted open the straps. You are now ready to
transfer or hoist the child into the seat. The
Leeway Pelvic Cradle is fastened using the
middle buckle, and side velcro.
Always secure the Leeway Pelvic Cradle
first before fastening other buckles or
harnesses. Adjust the harness so the child
cannot slide or creep forward in the seat.
10.2 Adjusting the
Leeway Pelvic Cradle
The correct positioning and tensioning
of the Leeway Pelvic Cradle is key to a
child's postural management, affecting their
comfort and ability to carry out activities.
Please consult with your therapist to ensure
the Leeway Pelvic Cradle is positioned
correctly and that the straps are tensioned
appropriately.
C
C
To tension the Leeway Pelvic Cradle use the
4 side straps (c) and the velcro tabs (d).
If using the seat outdoors and your child is
wearing a coat, position the Leeway Pelvic
Cradle under the coat.
10.3 Chassis
The Mygo Max is designed to fit onto a
range of chassis. This user manual shows
the correct and safe use of the seating
system with the Leckey Hi-low chassis. For
all other chassis or bases please refer to the
manufacturer's handbook.
To prepare the Hi-low chassis for the seating
system we recommend that you raise the
chassis to a comfortable working height
by pressing the foot lever at the rear of the
chassis or by pressing the up button on the
handset of the powered option.
D