Receipt Of The Product - AERMEC VENICE Manual Del Usuario

The appliance must be installed
i
in compliance
legislation in force in the country
of destination.
Before starting any work, safety
i
checks must be performed in
order to reduce any dangers to a
minimum. All staff in charge must
be aware of the operations and
any dangers that may occur when
all unit installation operations
begin.
3. 1 HANDLING
The units are delivered with standard
packaging made up of a wooden base,
polystyrene protection and cellophane
wrapping. Before handling the unit,
make note of dimensions and weights
and then verify that the equipment used
for lifting and positioning is sufficient
and suitable and respects the safety
regulations in force.
Particular attention must be paid to all
3.2 MINIMUM TECHNICAL SPACES
22
3
loading, unloading and lifting operations
with national in or der t o pr event danger ous
situations for persons and damage to
the framework and functioning parts
of the machine.
If a fork-lift truck is used, engage the
lower part of the base, distancing the
forks at maximum.
It is prohibited to deposit objects on
the unit.
It is prohibited to stop under the
unit
When the packaging has been
removed, the unit must be handled
by qualified staff, using equipment
that is suitable for the weight of the
chiller.
During lifting it is advised to mount anti-
vibration supports (VT and VTM), fixing
them to the holes on the base, according
to the mounting layout supplied with the
accessories (VT and VTM).
The machines in the VENICE series,
must be installed indoors, in suitable
500

RECEIPT OF THE PRODUCT

150
150
areas.
Neccessary technical spaces must
i
be envisioned, in order to allow
ROUTINE AND EXTRAORDINARY
MAINTENANCE AND
FUNCTIONING REQUIREMENTS.
Moreover, for correct functioning,
it must be installed on a perfectly
horizontal surface, which is able
to support the weight of the
machine.
The appliance is built using galvanised
steel sheet and treated by hot painting
using weatherproof polyester powders.
Particular arrangements are therefore
not required for protection of the unit.
FOR