Learn More - HP 130 Serie Guía De Referencia

Set up a wireless connection using Wi-Fi Protected Setup (WPS)
1. Press the WPS button
2. Within two minutes, press and hold the Menu button
PBC.
3. Wait while the printer automatically establishes the network connection. It takes up to two minutes. When
the network connection is established, the Wireless light
4. Continue to install the software.
Set up a Wi-Fi Direct connection
Use Wi-Fi Direct to connect to a printer wirelessly—without connecting to an existing wireless network. To
use Wi-Fi Direct:
• Make sure Wi-Fi Direct is enabled on the printer.
• To check the Wi-Fi Direct name and password (Network Key), press and hold the Menu button
printer control panel and select Network > Network Conf....
• To learn more, visit www.hp.com/go/wifidirectprinting.
Printer operating environment guidelines
Keep printer out
of direct sunlight temperature range:

Learn more

Product support
www.hp.com/support/laser130MFP
The information contained herein is subject to change without notice.
on your router.
Recommended Recommended
humidity range:
17.5° – 25° C
30% – 70%
(63.5° – 77° F)
on the printer and select Network > Wi-Fi > WPS >
stops blinking and glows steady blue.
Keep printer in
well-ventilated area
HP wireless printing
www.hp.com/go/wirelessprinting
on the
Do not exceed
voltage limits
3