Fuse Replacement; Festoon String Linking - Chauvet DJ Festoon 2 RGB Guía De Referencia Rápida

To Begin
Unpack your Festoon 2 RGB and make sure you have received all parts in good condition. If the box or contents appear
damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.

Festoon String Linking

The Festoon 2 RGB includes 20 RGB bulbs. These bulbs can be connected for a custom length. Every 20 bulbs are
considered one LED string for Pixel and Pixel+ DMX personalities.
Mounting
Before mounting this product, read the
Mounting Diagram
Festoon Controller
Safety cable
(such as CH-05
from Chauvet)
You may use the extension string if you need more distance for mounting.
Festoon 2 RGB QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes.
M12 Mounting
Hole
Rear Keyhole Mounting
EN
2