Required Parts - Health O Meter Professional 349KLX Manual De Instrucciones

SETUP / BATTERY / TRANSPORT (CONTINUED)
Preparing a 349KL Scale for Transport
This scale can be easily placed into carrying case (item # 64771) for storage, or transport from
one room to another. This scale does not include the carrying case item # 64771, and must be
acquired separately (see Figure 7 below). To prepare the scale for transport, follow these
steps:
1. Remove the display assembly and display bracket from its current position.
2. Unplug the AC adapter and cable from the display assembly, and remove the AC adapter
from the outlet.
3. Carefully store the AC adapter, display bracket, and display assembly in carrying case to
prevent damage during transport (see Figure 8 on page 15).
4. With the scale platform on the floor, lift scale platform carefully and place scale platform into
the carrying case. Position scale platform such that the RS-232 serial port and cable are facing
up (see Figure 8 on page 15).
5. Close carrying case flap over the scale (see Figure 7 below).
6. Grasp the carrying case strap and lift carefully into the upright position. Position the strap
over a shoulder (see Figure 9 on page 15). The scale can now be transported.

Required Parts

(1) Display assembly
(1) Scale platform
(1) Display bracket
(1) Carrying case (item # 64771)
Note: Carrying case item # 64771 is not included.
Figure 7
14