CAUTION AND WARNING
To prevent injury and damage to your scale, please follow these instructions very
•
carefully.
Assemble and operate the scale per the enclosed user instructions.
•
For accurate weighing, this scale must be placed on a flat, stable surface.
•
For accurate weighing, verify before each use the proper operation
•
according to the procedure described in this manual.
Operating this scale at voltages and frequencies other than specified can
•
damage the equipment and will void the warranty.
Do not transport the scale with any weight on the platform.
•
Do not exceed recommended weight limit of 400 lb / 180 kg for this scale.
•
Do not use in the presence of flammable or explosive materials.
•
For accurate weighing, if the "Lo" indicator activates, replace the battery
•
or switch to the AC adapter as soon as possible.
If the scale becomes damaged, it should not be operated until properly serviced. All
•
repairs should only be performed by authorized Health o meter
service personnel.
When replacing / inserting the battery, be sure to use a new 9V battery.
•
To prevent patient injury, the patient must be attended to throughout the
•
entire weighing event.
When operating this scale with the optional AC adapter:
Operate this scale exclusively with the AC adapter provided by Health o
•
®
meter
Professional. Use of an unspecified adapter will void the warranty,
and can pose a serious safety hazard.
For use with AC adapter model ADPT40.
•
Prior to using this scale, inspect the AC adapter cord for cracking or
•
fraying, or for broken / bent plug prongs.
Prior to using this scale, ensure that the AC adapter is plugged into an
•
outlet with the rated voltage appropriate for operation.
Ensure that the AC adapter outlet is wired to a circuit breaker or other
•
protected power source.
Ensure that the AC adapter and scale do not come in contact with liquids,
•
excessive temperature, or excessive humidity.
Unplug the AC adapter, and carefully store both the AC adapter and
•
adapter cord before moving the scale.
If the scale is being connected to another medical device, the power
•
adapter must not be used. Disconnect the power adapter from the scale
and use only the battery power. This ensures proper electrical isolation.
3
®
Professional