oneConcept Beaufort Manual Del Usuario página 34

Important information about the batteries
• If LED does not light up or is on permanently, make sure the battery is inserted the correct
way and inserted fully, starting over if necessary. Do not install the batteries backwards as
it may permanently damage the outdoor sensor.
• We recommend Lithium batteries for cold weather climates, but alkaline batteries are suf-
ficient for most climates. Rechargeable batteries have lower voltages and should never be
used.
Mount outdoor sensor
Before proceeding with the outdoor mounting detailed in this section, you need to make sure
the base station can receive the data from outdoor sensor, while you keep the assembled out-
door sensor package nearby (although preferably not closer than 1.5m from the console). This
will make any troubleshooting and adjustments easier and avoids any distance or interference
related issues from the setup.
After setup is complete and everything is working, return here for outdoor mounting. If issues
show up after outdoor mounting they are almost certainly related to distance, obstacles etc.
The mounting assembly includes two U-Bolts and a bracket that tightens around a 1 to 2" dia-
meter pole (not included) using the four U-Bolt nuts.
34
8