Connections And Software; System Requirements - oneConcept Beaufort Manual Del Usuario

As an important feature in addition to the display on the Touch Screen, the Weather Station
allows the read-out of all measured and displayed time and weather data in form of complete
history data sets on a PC.
For a comprehensive weather history, the Base Station allows the internal storage of up to
4080 complete sets of weather data with time and date. The base station will loose all weather
data if an interruption of power supply. In case the memory capacity of the Weather Station is
exhausted the oldest data sets stored will be overwritten by the new ones entered
Certain weather data or setting values can only be read out, processed, and displayed by me-
ans of a PC. Also the settings of the storing intervals from 5 minutes to 240 minutes for the
storage of data sets can only be performed by means of a PC.
The wiring between Weather Station and PC takes place by means of an included USB cable.
Download the EasyWeather software and follow the installation routine:
http://download.ecowitt.net/down/softwave?n=Easyweather
This software allows the display of all present weather data with graphic symbols. It also allows
the display, storage, and printing of history data sets, whose volume exceeding the maximum
4080 data sets of the Weather Station is only limited by the capacity of the PC's main memory.

System requirements

• Operating system: Windows NT4 (Service Pack >= 6a), Windows 2000, Windows XP, Win-
dows Vista, Windows 7, Windows 8
• Internet Explorer 6.0 oder later
• Prozessor: Pentium III 500 MHz or above
• RAM: min. 128MB, 256MB recommended
• CD-ROM drive
• USB
Install EasyWeather by double clicking SETUP.EXE. Follow the steps of the installation routine.
Launch the software by double clicking the icon on your desktop.
If you run the program for the first time, the current weather display will be displayed and at
the sub line of the window, the program will show related information regarding the read of
all history data into the PC. Please note however, when there is large amount of data is being
uploaded, it will take a few minutes time before the system can respond to your setup settings.
Otherwise it will display "read weather data fail" error message since the USB port is reading
the data from the memory and the system is not able to respond any further job tasks.
46
PC Connection

Connections and Software

Software "EasyWeather" - In Short