English - Crown CT44066 Manual Original

Technical data
Digital laser measure
Appliance code
Measuring range
Measuring accuracy
Time of single measurement
Laser type
Laser class
Operating temperature range
Storage temperature range
Battery type
Battery life (approximatelly):
- single measurements
- continuous measurements
Weight
Declaration of conformity
We declare under our sole responsibility that the
product described under "Technical data" is in
conformity with all relevant provisions of the di-
rectives 2006/42/EC including their amendments
and complies with the following standards:
EN 61010-1:2010,
EN 60825-1:2007�
Certification
manager
Merit Link International AG
Stabio, Switzerland, 15�12�2020
General safety warnings
ATTENTION! Before using the ap-
pliance for the first time, read this
manual carefully and follow all its
recommendations and rules.
Keep the manual for future reference or for the
next owner.
• Before using, check the appliance housing
integrity; in case of any damages the appliance
must not be used�
an accident or damage eyes� It is strictly
Wu Cunzhen
forbidden to look at the laser beam through
optical appliances (binoculars, telescopes, etc�),
this can cause damage to the retina�
• Do not operate the appliance in atmospheres
containing explosive gases, dust or vapors�
• When operating the appliance, keep in mind
that a measurement error can occur when you
take measurements on different surfaces� Such
surfaces include:
•
•

English

9
CT44066
[m]
[mm]
[s]
[nm]
II, <1 mW
[°C]
-10 ��� +45
[°C]
-20 ��� +70
2 x 1.5V ААА
[min]
[kg]
[lb]
Do not direct a laser beam at peo-
ple or animals, and do not look at a
straight or reflected laser beam. A
laser beam can blind people, cause
transparent surfaces (glass, water);
reflective surfaces (mirrors, polished metal);
242318
0,05-40
±2
0,25
635
5000
120-180
0,075
0�17