Agilent Technologies TV 902 Navigator Manual De Instrucciones página 272

18 Technical Information
Interconnections
How to connect the outputs of the controller
The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller.
The following figure refers to the programmable set point signal on
pins 11 and 9.
Figure 17
The following figure shows a typical output connection to a relay coil.
Figure 18
272/292
Typical output connection
Output to a relay coil
TV 902 Navigator User Manual / 87-900-999-01 (A)