Thermo Scientific ULT-80 Manual Del Usuario página 43

Figure 2 Setup Loop (2 of 2)
NOTE: Should you desire to return to the temperature display and abort all
changes, keep pressing the NEXT ENTER until the display reads Stor, then
press NO.
- 15 -
Hit = High Temperature Limit
Lot = Low Temperature Limit
r232 = RS232 Protocol
bAUd = BAUD rate (default 9600)
dAtA = Data bits (default 8)
StoP = Stop bit (default 1)
PAR = Parity (default none)
Stor = Store