Precautionary Labels; Product Overview; Product Components; Assemble The Probe Holder - Hach sensION+ EC71 Manual Del Usuario

Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or
damage to the instrument could occur if not observed. A symbol, if noted
on the instrument, will be included with a danger or caution statement in
the manual.
This symbol, if noted on the instrument, references the instruction
manual for operation and/or safety information.
Electrical equipment marked with this symbol may not be disposed of
in European public disposal systems after 12 August of 2005. In
conformity with European local and national regulations (EU Directive
2002/98/EC), European electrical equipment users must now return
old or end-of-life equipment to the Producer for disposal at no charge
to the user.
Note: For return for recycling, please contact the equipment producer or supplier
for instructions on how to return end-of-life equipment, producer-supplied
electrical accessories, and all auxillary items for proper disposal.

Product overview

™
The sensION + meters are used with probes to measure various
parameters in water.
™
The sensION + EC71 meter measures conductivity, salinity, TDS and
temperature. Measurement data can be stored and transferred to a
printer or PC.

Product components

Refer to Figure 1 to make sure that all components have been received.
If any items are missing or damaged, contact the manufacturer or a
sales representative immediately.
4 English
Figure 1 Meter components
1 Standard solutions (147 µS/cm,
1413 µS/cm and 12.88 mS/cm)
2 Calibration beakers (with magnetic
bar inside)
3 Probe holder
4 Power supply
Installation

Assemble the probe holder

Follow the numbered steps to assemble the probe holder and to connect
the magnetic stirrer.
5 Rod with o-ring
6 Probe (included with kits only)
7 Meter