Dive Safety Factor (Sf); Deep Stop - Cressi Leonardo Manual De Istrucciones

22

DIVE SAFETY FACTOR (SF)

The Safety Factor is an additional parameter
whose purpose is to make dives safer based on
the existence of personal risk factors which in-
crease the risk of decompression sickness. The
diver can set it on three values: SF0/SF1/SF2.
The factory setting is SF0, i.e. disabled.
WARNING: Enable and set a higher
safety factor (SF2/SF3) whenever you are
aware of conditions which may increase the
risk of decompression sickness. This way,
non decompression times will be shorter
and the dive will be more conservative, en-
suring a greater safety.

DEEP STOP

(im. 6)
There are different diving teaching methodolo-
gies and decompression theories. Each of those
has been developed according to important
scientific concepts, lab tests and practical tests.
Some of those, during specific dives, support
and require DEEP STOP , while others do not
contemplate this type of decompression pro-
file. Leonardo is factory set on DEEP STOP . If
you want to disable it, just press the button until
you reach the DIVE SET mode, press and hold
to enter the mode, press to browse until DEEP
STOP flashes. Now press and hold until
"Deepst" "ON" is displayed. Pressing, OFF is
displayed and the arrow icon on the bottom
right disappears. Deep Stop has been disabled.
The computer automatically returns to the
main menu.
(im. 7)