13F1 - 13F2.1
Diagram for the sequence of manual configurations ("activation time" trimmer)
Access to configuration press buttons
PRG + P1 for 2s access is confirmed with
P1
Adjust the trimmer
to vary the lock
activation time or
press P1 to
continue to the next
advance in the
configuration
phase
Adjust the trimmer to
P1
vary the talk, self-start
and response time
or continue to the
press P1 to
advance in the
configuration
phase
P1
Remapping buttons
press P1 to
advance in the
configuration
phase
P1
press P1 to exit
the configuration
phase
Confirmation of exiting
the configuration phase
indicated with a beep of 1s
(excluding EEPROM reset)
a beep for 1s
PRG
P1
Lock activation time adjustment
Adjusting the trimmer in 16 positions
indicated by 1 beep for each position
step
Talk, self-start, response time adjustment
Adjusting the trimmer in 16 positions
indicated by 1 beep for each position
next step
Press PRG to remap
buttons P1 or P2
P1 or P2
Press PRG to access
the EEPROM reset
EEPROM reset
of the trimmer
-
+
of the trimmer
-
+
timeout
wait
PRG
P1
tone
30s
press the button 1
time to configure (P1
Continuous
beep emitted
for 8s
PRG
P1
EN
Press PRG to save
Save confirmation
with a beep
PRG
P1
Press PRG to save
Save confirmation
with a beep
PRG
P1
timeout
P1
wait
Press the lock button of
tone
the indoor station. Save
30s
confirmation with a beep
or P2)
Configurations
P1
deleted and return to
the default condition
press P1 3 times in a
time < 8s
13