Pro Island Hood; Product Information; Important Instructions - Wolf PRO ISLAND HOOD Guia De Instalacion

PR O I S L A N D HO O D

Product Information

Important product information, including the model and
serial number, are listed on the product rating plate. The
rating plate is located on an inside wall of the hood shell
(filters need to be removed). Refer to the illustration below.
If service is necessary, contact Wolf Factory Certified
Service with the model and serial number. For the name of
the nearest Wolf Factory Certified Service or for questions
regarding the installation, visit the contact and support
section of our website, wolfappliance.com, or call Wolf
Customer Care at 800-222-7820.
RATING PLATE
Rating plate location

IMPORTANT INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY, OBSERVE THE FOLLOWING:
• Installation work and electrical wiring must be
done by qualified person(s) in accordance with all
applicable codes and standards, including fire-
rated construction.
• Two installers are recommended due to the size
and weight of the pro hood.
• Install the pro hood only with a blower manufac-
tured by Wolf.
• When cutting or drilling into the wall or ceiling,
do not damage electrical wiring and other hidden
utilities.
• Ducted fans must always be vented to the
outdoors.
CAUTION
To reduce the risk of fire and properly exhaust air,
be certain to duct air outside. Do not vent exhaust
air into spaces within walls or ceilings or into
attics, crawl spaces, or garages.
wolfappliance.com | 3