Stagnoli ENERGY Manual Del Usaurio página 16

Way of functioning
GB
Energy receiver works in 4 different modes:
1. remote load power saving . Energy puts tension to the installation only at recei-
ving an external signal (radio or input) and it lasts only the following 5 minutes.
input
At receiving the signal through the remote control or the input, the fi rst-channel
relay closes the contact for 5 minutes, whereas the second-channel relay, after 2
seconds having received the signal, closes the contact for one second. The two
channels work dependant as they are managed by the same input signal. Two
output are associated to this input signal.
2. impulsive signal. Energy controls independently the two output relays in an
impulsive way.
At receiving the radio signal through the remote control, the relay commutes for
one second.
16
power
start
control
board
start
start
control
board
gate
control
board
gate 1
gate 2