Overview; Mt20W Information; Adding The Mt20W To Your Engage™ Technology Account - Allegion aptiQ MT20W Guia Del Usuario

Overview

Overview
The aptiQ™ MT20W multi-technology enrollment reader is designed
to simplify the enrollment of dual and smart credentials. The MT20W
is powered by a USB cable (via a computer's USB port or a powered
USB plug) and utilizes a local Wi-Fi connection for certain scenarios
(e.g., enrolling no-tour credentials). The MT20W is compatible with
aptiQ™ smart credentials (MIFARE Classic and MIFARE DESFire
EV1).
The MT20W supports no-tour (with supported locks) via aptiQ™
MIFARE Classic or MIFARE DESFire EV1 credentials.

MT20W Information

Adding the MT20W to Your ENGAGE™
Technology Account
In order to use your MT20W Enrollment Reader with no-tour
functionality, you must first add it to your ENGAGE Technology
Account. The following steps will take you through this process.
1 Power up the MT20W via a computer's USB port or a
powered USB plug.
2 Open up the ENGAGE Technology mobile application and
log into your account.
3
Click "Connect" at the bottom of the screen, then click
the "+" sign at the top. This will add a new device to your
account.
4 Click "Ok" to the popup message (concerning the NDE
Series Lock).
5 A list of devices capable of being added to your site will be
displayed. You will see the "MT20W" device in the list. Click
"Add". At this time the LED in the MT20W will be slowly
flashing blue to indicate Bluetooth communication to the
ENGAGE Technology mobile application.
4 • aptiQ • MT20W Enrollment Reader User Guide