Supported Credentials; 13.56Mhz Technologies; No-Tour Instructions; Partner Managed Systems - Allegion aptiQ MT20W Guia Del Usuario

Credential Information

Supported Credentials

The following credentials are supported by the MT20W Enrollment
reader:

13.56MHz Technologies

ISO14443 aptiQ MIFARE DESFire EV1
ISO14443 aptiQ MIFARE Classic

No-Tour Instructions

Partner Managed Systems

For a partner managed electronic access system, please reference
their documentation to add no-tour credentials.

ENGAGE Technology Managed Systems

One of the key features of a supported lock is the no-tour function.
By using the MT20W Enrollment Reader, smart credentials can be
assigned/registered to a user without visiting or gaining immediate
access to the lock. The next time the new smart credential is presented
to the supported lock, user access to the lock is updated.
1
Place the credential that needs to be assigned or changed
on top of the MT20W.
2
You will hear a short beep confirming that the credential has
been scanned.
3
You can leave the credential on the device. The LED will
stay ON green. Alternatively, you can remove the credential
and present it later to have the access data written.
4 Open the ENGAGE Technology web application and log into
your account.
5
You will see the credential you just scanned is now available
in the stock list. The credential may now be assigned
access. The badge ID listed on the credential (after the
dash) is displayed in the stock list.
aptiQ • MT20W Enrollment Reader User Guide • 7