Settings And Viewing The Set Point; Locking And Unlocking The Touch Screen - Hayward R32 Manual De Instalación E Instrucciones

4. USER INTERFACE (continued)

4.2 Settings and viewing the set point

(Desired water temperature)
In OFF mode and in ON mode
Press once the button
Press twice the button
Settings are made to an accuracy of 0.5 °C.
Note: The settings are automatically saved after 5 s if no button is pressed.
It is recommended never to exceed 30°C to avoid deterioration of the
liners.

4.3 Locking and unlocking the touch screen

Press the On/Off
inactive.
To unlock, press
The buttons become active again.
or to view the set point.
or to set the desired set point.
button for 5 seconds until it beeps. The buttons become
for 5 seconds until it beeps.
13