Blowing Feature - RIDGID RV2400A Manual Del Usuario

SP6636 1/10/07 9:52 AM
Operation (cont.)

Blowing Feature

Your vac features a blowing port. It can
blow sawdust and other debris. Follow the
steps below to use your vac as a blower.
WARNING: Always
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a blower.
WARNING: To reduce the risk of
injury to bystanders, keep them clear
of blowing debris.
Page 14
1. Locate blowing port of your vac.
2. Insert the locking end of the tug-along
hose into the blowing port of the vac.
The hose should snap into place. To
remove the hose from the vac, press the
release button in the hose assembly
wear safety
and pull the hose out of the vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose.
4. Turn vac on and you are ready to use
your vac as a blower.
Tug-A-Long
Hose
14
WEAR YOUR
FORESIGHT IS
BETTER THAN
NO SIGHT
Blowing
Port