Simplified Eu Declaration Of Conformity - Urmet 1093/182WM1 Guía Rápida De Inicio

2

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, URMET S.p.A. declares that the radio equipment type: camera 1093/182WM1 is in
compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at
the following internet address: www.urmet.com
3 INSTALLATION
It is advisable to proceed as follows for correct camera installation and configuration:
1. Make sure that no units are powered before starting the installation procedure.
2. Remove the protection dome by unscrewing with the provided spanner the three locking
screws. Make 4 fixing holes (for false-ceiling mounting, make also a 15mm diameter
hole for passage of cables), using the vandal dome as drilling template.
3. Fix the vandal dome to the surface with screws.

Note: If the dome is not false-ceiling mounted, unscrew the cables passage screw on the
dome side.
4. Adjust lens angle, slant and rotation, in order to capture correctly the selected images
10
360°
ATTENTION.
reflections on the image it's
Max 75°
strongly recommended not to
overtake the indicated slant
360°
To avoid
DS1093-559