Display Settings - PURE Evoke D2 Manual Del Usuario

Display settings

Changing the backlight brightness level
1. Press Menu and turn and press the Select dial to choose 'Display'.
2. Turn and press the Select dial to choose 'Backlight'.
3. Turn and press the Select dial to adjust the brightness level when Evoke's display is 'Active' or in 'Standby'.
4. Turn and press the Select dial to select 'Level'.
5. Turn and press the Select dial to set a brightness level between '1' (dim) and '5' (bright).
Changing the duration that the backlight is illuminated
1. Press Menu and turn and press the Select dial to choose 'Display'.
2. Turn and press the Select dial to choose 'Backlight'.
3. Turn and press the Select dial to adjust the duration the backlight is illuminated for when Evoke's display is
'Active' or in 'Standby'.
4. Turn and press the Select dial to select 'Duration'.
5. Turn and press the Select dial to choose one of the following options:
Always on: The backlight will always be illuminated at your preferred brightness level.
Timed off: The backlight will always be illuminated at your preferred brightness level when a button is
pressed and then switch off after 7 seconds of inactivity.
Changing the information shown on the display
1. Press Menu and turn and press the Select dial to choose 'Display'.
2. Press Menu and turn and press the Select dial to choose 'Information'.
3. Turn and press the Select dial to choose one of the following options:
Scrolling text: Provided by the broadcaster.
Signal strength: The clear block indicates reliable reception level.
Date: Displays the current date.
Signal quality: (Digital radio only) From 0 (low) to 100 (high).
EN
13