8. T
AKING A PICTURE
• Switch on the camera and turn the mode switch to the AUTO
position
automatically set in AUTO mode.
• Specify the required image section with the LCD monitor.
• Carefully press the shutter release until you feel a little resistance and hold
it in this position. The camera will focus and determine the exposure.
• When it has focused, there will be a short audible signal and the display
panel will light up.
The colours of the corners of the focus display will show the
focus condition.
Successfully focused:
Focusing failed:
. All the settings for taking pictures by the camera will be
The colour of the corners will change
from "white" to "green".
The colour of the corners will change
from "white" to "red".
33