Indel B SAFE 10 SMART Manual Del Usaurio página 38

SAFE 10/30 SMART - 35 SMART PLUS
UNIVERSAL SOCKET (ONLY FOR SAFE 30/35)
An universal power socket is available; it is placed inside the Safe door, to connect to electric systems of
several devices such as a PC or a battery charger for mobile phones. The power cable of this socket comes
out of the back of the Safe and ends with the three cables (phase, neutral and ground) that are directly
connectable to the terminals of the electrical installation or to a normal socket
In case of a direct connection to the
electrical installation, this one must have
a complete sectioning device of the line
(omnipolar disconnection), the minimal
opening distance of the contacts being
3.5 mm.
If the power cable is connected to a
normal socket, this one must be kept fully
reachable.
WARNING
If for whatever reason the power cable
should be damaged, disconnect it from
the electrical power system (or take off
the plug from the socket) and contact the
Technical Assistance Service.
INDEL B SMART BOX
It is possible to use a program called Indel B Smart Box, which stores the openings of the Safe in a data file.
This program manages the file according to the customer code used and/or the kind of key used (Owner
Key, Master Key or Mechanical Key), showing date and time of the Safe opening.
WARNING
To install the program some minimal system requirements are necessary. These requirements are:
Operating System: Windows Xp, Windows 2000, Windows 98
RAM: 64 MB
Processor: Pentium III
USB INTERFACE
ISERIAL INTERFACE
DATA CARD (YELLOW)
SAFE_10_30_35_SMART_IM_20190517
Power cable
36
Door
Universal socket
ENCODER
TIME CARD (GREEN)