Indel B SAFE 10 SMART Manual Del Usaurio página 41

ENCODER INSTALLATION
Once the software installation is finished, it is necessary to connect the encoder to the computer
through a serial interface or a USB interface. Once decided the connection to be performed, a
series of installation windows of the encoder driver will open in succession, driving the user step
by step through installation.
WARNING
At this point the Indel B Smart Box program is ready to be used and is launched automatically
by the computer at the end of the installation. If this does not happen, look for it in the programs
menu and launch it manually.
This window asks to choose the type of
installation to be performed.
Select in the first window "No, Not
this time" option, then click on "Next".
Select "Install the software automatically
(Recommended)" in the second window
and then click "Next".
Click on the "Next" button to continue the
installation.
Click on the "Cancel" button to stop the
installation.
At this point the driver installation
is complete. Click on "Finish" to end
installation.
39