Global Air NPC1-14C Manual De Usuario página 7

Fan
Press FAN button to select a desired fan speed, fan running speed c an be adjust by below order,
Low Speed
Timer
Pressing the Timer button can get timer function and set the unit to auto on and off.
Auto-On setting:
 When the air conditioner is OFF, press them to select a desired "auto-on" timer using UP and Down button.

Timer will display on the LCD panel

Timer can be changed at any time in 1-24 hours
Auto-Off setting:
 When the air conditioner is ON, press to select a desired "auto-off" timer using UP and Down button.

Timer will display on the LCD panel

Timer can be changed from 1-24 hours.
Note:
 For example, if you press the Timer to '2', the unit will turn on or shut off automatically after 2 hours

Timer interval is 1 hour.

Once set, the timer icon will flash 5 times for confirmation.
Up / Down
To control the set temperature and timer setting:
1. Press the "UP" or "DOWN" button to select a desired temperature (60 -86℉)
2. Timer instructions: auto-on setting and auto-off setting.
3. Press the "UP" and "DOWN" buttons simultaneously to make Celsius and Fahrenheit degrees interchange.
Auto Swing
Press the "TIME R" and "SPEED" buttons simultaneously to start or close auto oscillation function.
Sleep
Press the "TIME R" and "UP " buttons simultaneously to start or close the sleep function.
Energy Cons ervation
Press "MODE " to get Energy Conservation, low energy consumption under this mode.
Auto-clean:
Press "MODE" to get Auto Clean,
Medium Speed High Speed
keep three minutes before off under COOL, DEHUMIDIFY ING modes
7