Setting The Time And Date Manually - ADE WS 1704 Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 90
No data display from the wireless outdoor sensor
1. Check whether you have inserted the batteries
correctly.
2. Check whether the location of the wireless outdoor
sensor is suitable, see "Choosing a location".
3. Press and hold
to the outdoor sensor.

Setting the time and date manually

If there is more than approx. 20 seconds between
two pushes of a button, the setting process
automatically ends and you will have to repeat it.
1. Press and hold the
12- and 24-hour time format blinks on the display.
2. Using the
("12 hr" or "24 hr").
3. Press
in order to save the settings.
On display "00".
4. By the
or
setting for the most countries of Europe is "00").
5. Proceed as previously described.
− Press the
− Press
Weather Station with Wireless Outdoor Sensor WS 1704
to manually start signal reception
button until the indicator for the
and
buttons, set the desired time format
button, select your time zone (the proper
or
button to set the desired value.
to save the settings.
65

Publicidad

Tabla de contenido
loading

Tabla de contenido