Lorex LZC7092B Manual De Instrucciones página 15

5
Installation
5.3 Installation (Indoor/Outdoor)
Make sure to disconnect the power adapter before installing the camera. Camera will be-
gin moving immediately when power adapter is connected.
To install the camera:
1. Use the back of the wall mount to mark holes for the wall mount screws
and cable and drill the holes.
2. Connect the cables as shown in 4 Connecting the Camera, page 4.
3. Attach the camera and wall mount to the wall using the included mounting
screws (4x).
Note
Use the included drywall plugs if installing in drywall.
4. Remove protective vinyl sheet from the dome cover once installation is
completed.
#LX400006; r. 1.0/11219/11445; en-US
CAUTION
9